AP117 OSD

OSD 1.information displayed includes altitude, flight speed, flight direction 2.connected to the FY-21AP and FY-3ZT system

AP117 OSD

1.     Briefly introduce

The AP117 OSD overlays flight telemetry information onto your video image. The telemetry information displayed includes altitude, flight speed, flight direction, and home direction.The AP117 can be connected to the FY-21AP and FY-3ZT systems to display autopilot telemetric data, or to a GPS receiver to display positioning data.

AP117 automatically adapts to either PAL or NTSC video input. The adaptive processes within about 2S.

Working status explanation:

After connecting the power supply, the indicator LED light will be activated.The AP117 will automatically detect the incoming video (NTSC or PAL).The "NTSC" or "PAL" will overlaid on the screen when the video signal is formatted. If receive signal from FY-21AP FY-3ZT or the GPS module, the working indicator of AP117 OSD will begin to flash.

Once the input video is detected even if there is interruption to the video signal, the telemetry data of the AP117 will continue to be transmitted via the video stream.

The telemetry data:

1	Attitude measurement error coefficient(refer to the prompt)	11	The quantity of satellite used for positioning
2	GPS Speed (Unit: km/h)	12	Power battery current (Unit:A)
3	The pitch angle of the plane (Unit deg)	13	Relative Altitude (Unit : m)
4	The roll angle of the plane (Unit deg)	14	Horizon Position Display
5	Current latitude and longitude of the plane (Format: “dddmm.mmm” )	15	The angle of turning to the return point (Unit: deg)
6	Total Flight Time (Format: “mm: ss”)	16	Course angle of flight (Unit:deg)
7	Flight Mode	17	Operating temperature(Unit: °C)
8	Distance to the take-off Point (Unit : m)	18	The battery voltage of the video transmitter(Unit:V)
9	Power Battery Voltage (Unit:V)	19	The battery power consumed (Unit: mA / h)
10	Climb rate(Unit:m/s)

2.     Features

The OSD can be controlled to show different desiplay imformations via one spare channel of your radio Rx. There are 5 optional desplay modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.Mode B is default when the SW connector left unconnected.Mode C is default when a jumper is used in the SW connector.

PWM Signal	900-1140μs	1140-1380μs	1380-1620μs	1620-1860μs	1860-2100μs
display mode	Mode E	Mode D	Mode C	Mode B	Mode A
Items	No informations displayed	Brief Mode	Default Mode with radar function	Default Mode With artificial horizon	All informations displayed

l        Only connect to the GPS Module

The AP117 can also display the flight information except the attitude information.

Mode A,All informations displayed

In this mode display detail information of geographic coordinates ,include the Current latitude and longitude of the plane. It is help enough for some geographic coordinates calibration staff, and also helpful for finding your plane when the plane is lossed. At the same time , it also display the curse and the angle point to the take-off point .

AP117 OSD